◇High-pressure,
maximum continuous operating pressure up to 28 Mpa; complete
displacement serious, from 8ml/rev to 200ml/rev
◇Key components inside
the pump such as patent bearing, sealing parts are all imported
originally from the US to secure better functioning, higher efficiency
and longer life cycle.
◇Low noise, compact
casting and pleasing to the eye.
◇Special dry assembling
process and clean assembling environment to insure cleanness inside the
pump
◇Adopt American SAE
standard on C shaft for customer to choose, fix and replace.
P3100
Series Gear Pumps/Motors
3100 series features compact structure, small size,light weight and high
pressure. Advanced thrust plate
design and unique ring seal structure improve pump life and performance.
US patented SC bearing increase pump durability, yet applicable in peak
loads. US Imported bearing, seal and etc.Multiple Pumps available.Motors
features of low start torque...
P5100
Series Gear Pumps/Motors
P5100/124 series is the high-pressure multiple gear pump, rear pump can
incorporate the relief valve to simplify the hydraulic system. Trust
plate with special wear coating improves pump life and performance. US
imported bearing, seal and etc. improve pump reliability...
P5100/P124 Seriesare
tandem high-pressure gear pumps, the back pump may attachadditional safety valve to make the hydraulic system more
simple. The patented thrust plates adopt special wear coating to
increase the pumps’ durability. Key parts are originally imported. The
displacement range of the front pump is 20-100ml/rev, maximum pressure
up to 28MPa. The displacement range of the back pump is 8-25ml/rev, with
the maximum pressure up to 24MPa...
P7600 Series Gear Pumps/Motors7600
series is the high-pressure, large displacement gear pump. US patent
stress Roller Bearing extends pump life by 30%. Advanced thrust plate
design and unique ring seal structure improve pump life and performance.US
imported bearing, seal and etc. Improving pump reliability. Multiple
pumps available.7600 series motors features of low start torque...
P124 Series Gear Pumps/MotorsP124 series apply heavy duty bearing high strength
alloy steel gear and shaft sets. Pressure balanced wear plates maintain
high pump efficiency throughout all operating ranges. US Imported
bearing, seal and etc. Improving pump reliability.Multiple pumps
available.Port end cover can incorporate the relief valve...
P257 Series Gear pumps/Motors
P257 series high pressure gear pump features of small
size and compact structure, the Max. Pressure up to 31Mpa, Max.
Displacement reach 100ml/r. Reasonable pressure compensate
wear-plate and high
quality DU bearing providing durable service & high pump efficiency. US
imported bearing, seal and etc. improving pump reliability. Multiple
pumps available...
P257/P124 Series
High Pressure Gear pumps
P257 /124 series high pressure multiple gear pump features of small
size and compact structure, the Max.Pressure up to 31Mpa, Max.
Displacement reach
100ml/r. Reasonable pressure compensate wear-plate and high quality DU
bearing providing durable service & high pump efficiency. US imported
bearing, seal and etc. Improving pump reliability....
P360 Series High Pressure Gear pumps/Motors
P360 series high pressure gear pump features of small size,
large-displacement, high pressure and compact structure, the Max.
Pressure up to 28Mpa,Max. Displacement reach 150ml/r. Reasonable
pressure compensate wear-plate and high quality DU
bearing providing durable service & high pump efficiency. US imported
bearing, seal and etc. improve pump reliablity. Multiple pumps available...
P360/P124 Series High Pressure Gear pumpsP360 /P124
series high pressure multiple gear pump features of small size and
compact structure, the Max. pressure up to 28Mpa, Max. Displacement
reach 150ml/r. Reasonable pressure compensate wear-plate and high
quality DU bearing providing durable service & high pump efficiency. US
imported bearing, seal and etc. improve pump reliability...
FD Flow Dividers/Intensifiers adopt superior cast iron and
crowned roller bearings, which are suitable for various hydraulic
machines. Its folding structure, advanced thrust plates and special
surface processing greatly increased product’s lifespan. The divider
and intensifier has same structure and perform different functions
according to their different positions in the hydraulic system and they
can be assembled as tandem, triple or multiple divider/intensifier...
Dump truck pumpswith working pressure 2500PSI(17.5MPa),
rotating speed 1400RPM, heavy duty “pressure-controlled” crowned
roller bearing and build-in direct control valve. It has equipment used
for protecting the pump and cylinder when exalting the spool or the
spool is on neutral position. The pullout cables with neutral lock in
system are fixed with OE gas control or Add-on gas control equipment.
Its build-in load checking system keeps the truck in right angle. The
intermittent load adopts 2-line design and the consistent load adopts
3-line design...
Waste disposal pump systemVersa-Pak pump use backup
protected sealing outboard bearing, with uninstalling valve to avoid
fixation on the hydraulic system. The flow is up to 85GPM, pressure up
to 3000PSI. Versa-Pak valve has uninstalling system or dry valve system.
Its flow controlling system prevents over speed of hydraulic oil, and
uninstalling structure has flow controlling and uninstalling functions.
One only need to click the on-off on the control panel to let the
hydraulic system to work, it’s over speed control system secure the
hydraulic system under control...
